Drills and Drill Bits
Grainger Threaded Shank Drill #13 Cobalt
The Grainger 13/16" Threaded Shank Drill Bit is made of high speed steel and has a black oxide finish for durability. It features a 135 degree split point tip for faster penetration and reduced walking. The bit has a 1/2" hex shank to fit power drills. It can drill through metal, wood, and plastic. Overall length is 5-1/2". Made in the USA.
Grainger Threaded Shank Drill 3/8 Cobalt
The Grainger 3/16" Threaded Shank Drill Bit is made of high-speed steel and has a split point tip for fast, clean hole cutting. It has a 3/16" diameter and is 3-1/2" long overall. The shank is threaded 1/4"-20 for use in drill presses. The drill bit can cut through mild steel, aluminum, wood, plastic and other materials. It features a bright finish for corrosion resistance. This USA-made drill bit is ideal for metalworking applications that require frequent hole drilling.
Grainger Threaded Shank Drill #40 Cobalt
The Grainger 16W782 Threaded Shank Drill Bit is a high-speed steel bit with a 1/4" hex shank and a #7 screw point tip. It has a length of 2-1/2" and is designed for use in metal, wood, and plastic. The bit features a 135 degree split point tip that starts drilling with less thrust and torque. It can be used in hand drills or drill presses. This USA-made drill bit is ideal for a variety of drilling applications.
Grainger End Mill Kyocera EM 100025 100 Dia
The Kyocera 170HA7 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, profiling, contouring, and face milling in both ferrous and non-ferrous metals. The end mill features a center cutting design for plunge cuts.
Grainger Threaded Shank Drill #30 Cobalt
The Grainger 16W785 Threaded Shank Drill Bit is a high-speed steel bit with a 1/4" hex shank and #7 screw machine length. It has a 135 degree split point tip for faster penetration and cleaner holes. The bit diameter is 40/64" (5/8") and the overall length is 2-1/2". It can be used for drilling metal, wood, and plastic. Made in the USA.
Grainger End Mill Kyocera MEC 0750S62511T 0.750
The Kyocera 170HG2 is a 2 flute, high speed steel end mill with a 1/2" shank diameter. It has an overall length of 3-1/2" and a cutting diameter of 1/2". The end mill features a 135 degree split point tip and is designed for high feed milling in a variety of materials including steels, cast iron, aluminum, copper, brass, plastics and composites. With its high speed steel construction, this end mill provides good wear resistance and tool life. The 170HG2 is well-suited for slotting, side milling and contouring operations.
Grainger Threaded Shank Drill #11 Cobalt
The Grainger 11/16" Threaded Shank Drill Bit is made of high speed steel and has a black oxide finish for durability. It features a threaded shank that fits power drills and can drill through metal, wood, and plastic. The drill bit has a 118 degree point angle and is 11/16" in diameter. It can drill holes up to 1/2" deep. The overall length of the drill bit is 2-1/2". This threaded drill bit is ideal for metalworking applications that require drilling precise holes.
Grainger Threaded Shank Drill #20 HSS
The Grainger 20-piece Threaded Shank Drill Bit Set includes high-speed steel drill bits with black oxide finish for durability. The set contains sizes ranging from 1/16 inch to 1/2 inch by 64ths. The drill bits have a threaded shank that fits power drills. This 20-piece set provides a range of drill bit sizes useful for metalworking applications like drilling holes in metal, wood, and plastic. The drill bits can be used with hand drills, drill presses, and milling machines.
Grainger Ball End Mill Single End 3.00mm Carbide
The Grainger 14K735 is a 14 gauge, type 1 solid copper building wire with THHN insulation. It is rated up to 90°C dry and 75°C wet locations. This wire comes in 500 foot spools and is UL and CSA listed. The 14K735 building wire is designed for use in conduit and general purpose wiring applications.
Grainger Sq. End Mill Single End Carb 21/64
The Grainger 14M453 is a Westward 3/8-inch drive deep impact socket set. This 15-piece socket set includes sizes ranging from 4mm to 14mm, providing a wide range of metric sockets for impact wrench applications. The sockets are made from chrome vanadium steel for durability and have a black phosphate finish to resist corrosion. According to the product details, this Westward socket set has a lifetime replacement guarantee against defects in material and workmanship. The set comes organized in a molded case for convenient storage and portability.
Grainger Sq. End Mill Single End Carb 9/64
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.375 inches. The mill diameter is 0.5 inches with a 0.03 inch corner radius. It can machine steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastic, and wood. It has an American National Standard Stub length shank. The end mill is uncoated.